TURQUOISE BOWIE
This Bowie is made from D-2 tool steel. The blade measures 1/4" X 1.75" X 10" with an overall length of 15 inches. The blade is flat ground with a false edge clip. The blade has been triple tempered with a sub-zero quench to a ~Rc 60. The tang is a through style. The double guard is 416 stainless steel. The handle starts with a bronze front collar followed by Desert Ironwood and a bronze spacer, turquoise spacer and another bronze spacer followed by more Desert Ironwood and a 416 stainless steel pommel. The sheath is dyed in a British Tan color and is hand sewn 7/8 oz. leather. The front has my pebble finish with a silver plated Concho. The top edge is covered by a thin leather chevron and silver and brass bolts at the top left and right. The hold down strap also has an embossed button.
Cost: $750.00
Contact me about delivery time for a similar knife.
BOWIE
The blade on this Bowie is 1/4" X 2" X 10" and is cannel ground with a hand rub finish. The blade steel is D-2 tool steel that has been triple tempered with a sub-zero quench to ~Rc 60. The spine has my rope hand file work (no Dremel tool used). The double guard is 416 stainless steel and the spacers following the guard is also 416 stainless steel with the same rope style file work that is on the spine. The through tang supports a premium Snakewood handle. The pommel is 416 stainless steel and also sports file work around the edge. The hand sewn leather sheath is dyed in the Saddle tan color and the top section has my pebble finish with a round leather lace border at the opening for the knife. The side bolts are embossed and silver plated.
$950.00
FREE SHIPPING!
Contact me about delivery time for a similar knife.
"TULLEY'S" BOWIE
The blade on this Bowie is .250 " X 2" X 11" . It is made from D-2 tool steel. The blade has been triple tempered with a sub-zero treatment to a ~Rc-61. The blade is flat ground with a hand rub finish. It also sports my file work down the spine. The bronze S-type double guard is 3.750" across and 1 1/2" wide. The top of the guard where your thumb would rest has a cross hatch pattern filed into it. The through tang supports a black linen Micarta handle. The handle has a caliber 50-70 cartridge inlayed one in each side with a cross hatch pattern filed into the side of the handle for a enhanced grip. The thin spacers behind the guard and before the pommel are white followed by brass. The pommel is bronze with a name plate attached to the back. The 8/9 oz. black leather sheath sports two 50-70 cartridge ends bolted to the top of the hand-sewn leather sheath. The small case on the front was made to hold a Leatherman Surge multi-tool. The sheath also has two leg tie down grommets so the knife can be secured to your leg. All the added furniture was requested and supplied by my client. .
The cost of this Bowie is $800.00
FREE SHIPPING in the U.S.A. !
Contact me about delivery time for a similar knife.
The Plainsman and Coffin Handle Bowie
Bowies available for immediate sale
THANK YOU